This furnace is mainly used for artificial aging treatment of standard profiles produced in the extrusion workshop, so as to eliminate the internal stress of the profiles and improve their mechanical strength.Vacuum sintering of transparent ceramics Put the billet on the material frame, push the material frame into the furnace, and close the furnace door.Turn on the heater and fan, observe the temperature rise in the furnace, the general temperature rise rate is 135°C/h, and make a record.Aluminum alloy and stainless steel vacuum brazing When the temperature in the furnace rises to 200°C, hold the temperature for 2.5 hours.Downtime baked.Strictly implement the shift system. Vacuum sintered powder metallurgy parts The shifter should clearly explain the use of the aging furnace and the problems found to the successor, and fill in the shift record. The successor should inquire in detail and check the acceptance.316L stainless steel vacuum brazing process
This furnace is mainly used for artificial aging treatment of standard profiles produced in the extrusion workshop, so as to eliminate the internal stress of the profiles and improve their mechanical strength.Vacuum sintering of transparent ceramics Put the billet on the material frame, push the material frame into the furnace, and close the furnace door.Turn on the heater and fan, observe the temperature rise in the furnace, the general temperature rise rate is 135°C/h, and make a record.Aluminum alloy and stainless steel vacuum brazing When the temperature in the furnace rises to 200°C, hold the temperature for 2.5 hours.Downtime baked.Strictly implement the shift system. Vacuum sintered powder metallurgy parts The shifter should clearly explain the use of the aging furnace and the problems found to the successor, and fill in the shift record. The successor should inquire in detail and check the acceptance.316L stainless steel vacuum brazing process